Meson WrapDB for Google's cityhash.
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799
  1. # Makefile.in generated by automake 1.11.3 from Makefile.am.
  2. # @configure_input@
  3. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
  4. # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
  5. # Foundation, Inc.
  6. # This Makefile.in is free software; the Free Software Foundation
  7. # gives unlimited permission to copy and/or distribute it,
  8. # with or without modifications, as long as this notice is preserved.
  9. # This program is distributed in the hope that it will be useful,
  10. # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  11. # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  12. # PARTICULAR PURPOSE.
  13. @SET_MAKE@
  14. VPATH = @srcdir@
  15. pkgdatadir = $(datadir)/@PACKAGE@
  16. pkgincludedir = $(includedir)/@PACKAGE@
  17. pkglibdir = $(libdir)/@PACKAGE@
  18. pkglibexecdir = $(libexecdir)/@PACKAGE@
  19. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  20. install_sh_DATA = $(install_sh) -c -m 644
  21. install_sh_PROGRAM = $(install_sh) -c
  22. install_sh_SCRIPT = $(install_sh) -c
  23. INSTALL_HEADER = $(INSTALL_DATA)
  24. transform = $(program_transform_name)
  25. NORMAL_INSTALL = :
  26. PRE_INSTALL = :
  27. POST_INSTALL = :
  28. NORMAL_UNINSTALL = :
  29. PRE_UNINSTALL = :
  30. POST_UNINSTALL = :
  31. build_triplet = @build@
  32. host_triplet = @host@
  33. subdir = .
  34. DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
  35. $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
  36. $(srcdir)/config.h.in $(top_srcdir)/configure COPYING NEWS \
  37. config.guess config.sub depcomp install-sh ltmain.sh missing
  38. ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  39. am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
  40. $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  41. $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  42. $(top_srcdir)/configure.ac
  43. am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  44. $(ACLOCAL_M4)
  45. am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  46. configure.lineno config.status.lineno
  47. mkinstalldirs = $(install_sh) -d
  48. CONFIG_HEADER = config.h
  49. CONFIG_CLEAN_FILES =
  50. CONFIG_CLEAN_VPATH_FILES =
  51. SOURCES =
  52. DIST_SOURCES =
  53. RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  54. html-recursive info-recursive install-data-recursive \
  55. install-dvi-recursive install-exec-recursive \
  56. install-html-recursive install-info-recursive \
  57. install-pdf-recursive install-ps-recursive install-recursive \
  58. installcheck-recursive installdirs-recursive pdf-recursive \
  59. ps-recursive uninstall-recursive
  60. am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  61. am__vpath_adj = case $$p in \
  62. $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  63. *) f=$$p;; \
  64. esac;
  65. am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  66. am__install_max = 40
  67. am__nobase_strip_setup = \
  68. srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  69. am__nobase_strip = \
  70. for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  71. am__nobase_list = $(am__nobase_strip_setup); \
  72. for p in $$list; do echo "$$p $$p"; done | \
  73. sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  74. $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  75. if (++n[$$2] == $(am__install_max)) \
  76. { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  77. END { for (dir in files) print dir, files[dir] }'
  78. am__base_list = \
  79. sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  80. sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  81. am__uninstall_files_from_dir = { \
  82. test -z "$$files" \
  83. || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  84. || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
  85. $(am__cd) "$$dir" && rm -f $$files; }; \
  86. }
  87. am__installdirs = "$(DESTDIR)$(docdir)"
  88. DATA = $(dist_doc_DATA)
  89. RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  90. distclean-recursive maintainer-clean-recursive
  91. AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
  92. $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
  93. distdir dist dist-all distcheck
  94. ETAGS = etags
  95. CTAGS = ctags
  96. DIST_SUBDIRS = $(SUBDIRS)
  97. DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  98. distdir = $(PACKAGE)-$(VERSION)
  99. top_distdir = $(distdir)
  100. am__remove_distdir = \
  101. if test -d "$(distdir)"; then \
  102. find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
  103. && rm -rf "$(distdir)" \
  104. || { sleep 5 && rm -rf "$(distdir)"; }; \
  105. else :; fi
  106. am__relativize = \
  107. dir0=`pwd`; \
  108. sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  109. sed_rest='s,^[^/]*/*,,'; \
  110. sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  111. sed_butlast='s,/*[^/]*$$,,'; \
  112. while test -n "$$dir1"; do \
  113. first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  114. if test "$$first" != "."; then \
  115. if test "$$first" = ".."; then \
  116. dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
  117. dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
  118. else \
  119. first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
  120. if test "$$first2" = "$$first"; then \
  121. dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
  122. else \
  123. dir2="../$$dir2"; \
  124. fi; \
  125. dir0="$$dir0"/"$$first"; \
  126. fi; \
  127. fi; \
  128. dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  129. done; \
  130. reldir="$$dir2"
  131. DIST_ARCHIVES = $(distdir).tar.gz
  132. GZIP_ENV = --best
  133. distuninstallcheck_listfiles = find . -type f -print
  134. am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  135. | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
  136. distcleancheck_listfiles = find . -type f -print
  137. ACLOCAL = @ACLOCAL@
  138. AMTAR = @AMTAR@
  139. AR = @AR@
  140. AUTOCONF = @AUTOCONF@
  141. AUTOHEADER = @AUTOHEADER@
  142. AUTOMAKE = @AUTOMAKE@
  143. AWK = @AWK@
  144. CC = @CC@
  145. CCDEPMODE = @CCDEPMODE@
  146. CFLAGS = @CFLAGS@
  147. CPP = @CPP@
  148. CPPFLAGS = @CPPFLAGS@
  149. CXX = @CXX@
  150. CXXCPP = @CXXCPP@
  151. CXXDEPMODE = @CXXDEPMODE@
  152. CXXFLAGS = @CXXFLAGS@
  153. CYGPATH_W = @CYGPATH_W@
  154. DEFS = @DEFS@
  155. DEPDIR = @DEPDIR@
  156. DLLTOOL = @DLLTOOL@
  157. DSYMUTIL = @DSYMUTIL@
  158. DUMPBIN = @DUMPBIN@
  159. ECHO_C = @ECHO_C@
  160. ECHO_N = @ECHO_N@
  161. ECHO_T = @ECHO_T@
  162. EGREP = @EGREP@
  163. EXEEXT = @EXEEXT@
  164. FGREP = @FGREP@
  165. GREP = @GREP@
  166. INSTALL = @INSTALL@
  167. INSTALL_DATA = @INSTALL_DATA@
  168. INSTALL_PROGRAM = @INSTALL_PROGRAM@
  169. INSTALL_SCRIPT = @INSTALL_SCRIPT@
  170. INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
  171. LD = @LD@
  172. LDFLAGS = @LDFLAGS@
  173. LIBOBJS = @LIBOBJS@
  174. LIBS = @LIBS@
  175. LIBTOOL = @LIBTOOL@
  176. LIPO = @LIPO@
  177. LN_S = @LN_S@
  178. LTLIBOBJS = @LTLIBOBJS@
  179. MAKEINFO = @MAKEINFO@
  180. MANIFEST_TOOL = @MANIFEST_TOOL@
  181. MKDIR_P = @MKDIR_P@
  182. NM = @NM@
  183. NMEDIT = @NMEDIT@
  184. OBJDUMP = @OBJDUMP@
  185. OBJEXT = @OBJEXT@
  186. OTOOL = @OTOOL@
  187. OTOOL64 = @OTOOL64@
  188. PACKAGE = @PACKAGE@
  189. PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
  190. PACKAGE_NAME = @PACKAGE_NAME@
  191. PACKAGE_STRING = @PACKAGE_STRING@
  192. PACKAGE_TARNAME = @PACKAGE_TARNAME@
  193. PACKAGE_URL = @PACKAGE_URL@
  194. PACKAGE_VERSION = @PACKAGE_VERSION@
  195. PATH_SEPARATOR = @PATH_SEPARATOR@
  196. RANLIB = @RANLIB@
  197. SED = @SED@
  198. SET_MAKE = @SET_MAKE@
  199. SHELL = @SHELL@
  200. STRIP = @STRIP@
  201. VERSION = @VERSION@
  202. abs_builddir = @abs_builddir@
  203. abs_srcdir = @abs_srcdir@
  204. abs_top_builddir = @abs_top_builddir@
  205. abs_top_srcdir = @abs_top_srcdir@
  206. ac_ct_AR = @ac_ct_AR@
  207. ac_ct_CC = @ac_ct_CC@
  208. ac_ct_CXX = @ac_ct_CXX@
  209. ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
  210. am__include = @am__include@
  211. am__leading_dot = @am__leading_dot@
  212. am__quote = @am__quote@
  213. am__tar = @am__tar@
  214. am__untar = @am__untar@
  215. bindir = @bindir@
  216. build = @build@
  217. build_alias = @build_alias@
  218. build_cpu = @build_cpu@
  219. build_os = @build_os@
  220. build_vendor = @build_vendor@
  221. builddir = @builddir@
  222. datadir = @datadir@
  223. datarootdir = @datarootdir@
  224. docdir = @docdir@
  225. dvidir = @dvidir@
  226. exec_prefix = @exec_prefix@
  227. host = @host@
  228. host_alias = @host_alias@
  229. host_cpu = @host_cpu@
  230. host_os = @host_os@
  231. host_vendor = @host_vendor@
  232. htmldir = @htmldir@
  233. includedir = @includedir@
  234. infodir = @infodir@
  235. install_sh = @install_sh@
  236. libdir = @libdir@
  237. libexecdir = @libexecdir@
  238. localedir = @localedir@
  239. localstatedir = @localstatedir@
  240. mandir = @mandir@
  241. mkdir_p = @mkdir_p@
  242. oldincludedir = @oldincludedir@
  243. pdfdir = @pdfdir@
  244. prefix = @prefix@
  245. program_transform_name = @program_transform_name@
  246. psdir = @psdir@
  247. sbindir = @sbindir@
  248. sharedstatedir = @sharedstatedir@
  249. srcdir = @srcdir@
  250. sysconfdir = @sysconfdir@
  251. target_alias = @target_alias@
  252. top_build_prefix = @top_build_prefix@
  253. top_builddir = @top_builddir@
  254. top_srcdir = @top_srcdir@
  255. ACLOCAL_AMFLAGS = -I m4
  256. SUBDIRS = src
  257. dist_doc_DATA = README NEWS COPYING
  258. all: config.h
  259. $(MAKE) $(AM_MAKEFLAGS) all-recursive
  260. .SUFFIXES:
  261. am--refresh: Makefile
  262. @:
  263. $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
  264. @for dep in $?; do \
  265. case '$(am__configure_deps)' in \
  266. *$$dep*) \
  267. echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
  268. $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
  269. && exit 0; \
  270. exit 1;; \
  271. esac; \
  272. done; \
  273. echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
  274. $(am__cd) $(top_srcdir) && \
  275. $(AUTOMAKE) --foreign Makefile
  276. .PRECIOUS: Makefile
  277. Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
  278. @case '$?' in \
  279. *config.status*) \
  280. echo ' $(SHELL) ./config.status'; \
  281. $(SHELL) ./config.status;; \
  282. *) \
  283. echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
  284. cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
  285. esac;
  286. $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
  287. $(SHELL) ./config.status --recheck
  288. $(top_srcdir)/configure: $(am__configure_deps)
  289. $(am__cd) $(srcdir) && $(AUTOCONF)
  290. $(ACLOCAL_M4): $(am__aclocal_m4_deps)
  291. $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
  292. $(am__aclocal_m4_deps):
  293. config.h: stamp-h1
  294. @if test ! -f $@; then rm -f stamp-h1; else :; fi
  295. @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
  296. stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
  297. @rm -f stamp-h1
  298. cd $(top_builddir) && $(SHELL) ./config.status config.h
  299. $(srcdir)/config.h.in: $(am__configure_deps)
  300. ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
  301. rm -f stamp-h1
  302. touch $@
  303. distclean-hdr:
  304. -rm -f config.h stamp-h1
  305. mostlyclean-libtool:
  306. -rm -f *.lo
  307. clean-libtool:
  308. -rm -rf .libs _libs
  309. distclean-libtool:
  310. -rm -f libtool config.lt
  311. install-dist_docDATA: $(dist_doc_DATA)
  312. @$(NORMAL_INSTALL)
  313. test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
  314. @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
  315. for p in $$list; do \
  316. if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
  317. echo "$$d$$p"; \
  318. done | $(am__base_list) | \
  319. while read files; do \
  320. echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
  321. $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
  322. done
  323. uninstall-dist_docDATA:
  324. @$(NORMAL_UNINSTALL)
  325. @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
  326. files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
  327. dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
  328. # This directory's subdirectories are mostly independent; you can cd
  329. # into them and run `make' without going through this Makefile.
  330. # To change the values of `make' variables: instead of editing Makefiles,
  331. # (1) if the variable is set in `config.status', edit `config.status'
  332. # (which will cause the Makefiles to be regenerated when you run `make');
  333. # (2) otherwise, pass the desired values on the `make' command line.
  334. $(RECURSIVE_TARGETS):
  335. @fail= failcom='exit 1'; \
  336. for f in x $$MAKEFLAGS; do \
  337. case $$f in \
  338. *=* | --[!k]*);; \
  339. *k*) failcom='fail=yes';; \
  340. esac; \
  341. done; \
  342. dot_seen=no; \
  343. target=`echo $@ | sed s/-recursive//`; \
  344. list='$(SUBDIRS)'; for subdir in $$list; do \
  345. echo "Making $$target in $$subdir"; \
  346. if test "$$subdir" = "."; then \
  347. dot_seen=yes; \
  348. local_target="$$target-am"; \
  349. else \
  350. local_target="$$target"; \
  351. fi; \
  352. ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  353. || eval $$failcom; \
  354. done; \
  355. if test "$$dot_seen" = "no"; then \
  356. $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
  357. fi; test -z "$$fail"
  358. $(RECURSIVE_CLEAN_TARGETS):
  359. @fail= failcom='exit 1'; \
  360. for f in x $$MAKEFLAGS; do \
  361. case $$f in \
  362. *=* | --[!k]*);; \
  363. *k*) failcom='fail=yes';; \
  364. esac; \
  365. done; \
  366. dot_seen=no; \
  367. case "$@" in \
  368. distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
  369. *) list='$(SUBDIRS)' ;; \
  370. esac; \
  371. rev=''; for subdir in $$list; do \
  372. if test "$$subdir" = "."; then :; else \
  373. rev="$$subdir $$rev"; \
  374. fi; \
  375. done; \
  376. rev="$$rev ."; \
  377. target=`echo $@ | sed s/-recursive//`; \
  378. for subdir in $$rev; do \
  379. echo "Making $$target in $$subdir"; \
  380. if test "$$subdir" = "."; then \
  381. local_target="$$target-am"; \
  382. else \
  383. local_target="$$target"; \
  384. fi; \
  385. ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  386. || eval $$failcom; \
  387. done && test -z "$$fail"
  388. tags-recursive:
  389. list='$(SUBDIRS)'; for subdir in $$list; do \
  390. test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
  391. done
  392. ctags-recursive:
  393. list='$(SUBDIRS)'; for subdir in $$list; do \
  394. test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
  395. done
  396. ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
  397. list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
  398. unique=`for i in $$list; do \
  399. if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  400. done | \
  401. $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
  402. END { if (nonempty) { for (i in files) print i; }; }'`; \
  403. mkid -fID $$unique
  404. tags: TAGS
  405. TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
  406. $(TAGS_FILES) $(LISP)
  407. set x; \
  408. here=`pwd`; \
  409. if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
  410. include_option=--etags-include; \
  411. empty_fix=.; \
  412. else \
  413. include_option=--include; \
  414. empty_fix=; \
  415. fi; \
  416. list='$(SUBDIRS)'; for subdir in $$list; do \
  417. if test "$$subdir" = .; then :; else \
  418. test ! -f $$subdir/TAGS || \
  419. set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
  420. fi; \
  421. done; \
  422. list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
  423. unique=`for i in $$list; do \
  424. if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  425. done | \
  426. $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
  427. END { if (nonempty) { for (i in files) print i; }; }'`; \
  428. shift; \
  429. if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
  430. test -n "$$unique" || unique=$$empty_fix; \
  431. if test $$# -gt 0; then \
  432. $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  433. "$$@" $$unique; \
  434. else \
  435. $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  436. $$unique; \
  437. fi; \
  438. fi
  439. ctags: CTAGS
  440. CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
  441. $(TAGS_FILES) $(LISP)
  442. list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
  443. unique=`for i in $$list; do \
  444. if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  445. done | \
  446. $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
  447. END { if (nonempty) { for (i in files) print i; }; }'`; \
  448. test -z "$(CTAGS_ARGS)$$unique" \
  449. || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
  450. $$unique
  451. GTAGS:
  452. here=`$(am__cd) $(top_builddir) && pwd` \
  453. && $(am__cd) $(top_srcdir) \
  454. && gtags -i $(GTAGS_ARGS) "$$here"
  455. distclean-tags:
  456. -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
  457. distdir: $(DISTFILES)
  458. $(am__remove_distdir)
  459. test -d "$(distdir)" || mkdir "$(distdir)"
  460. @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  461. topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  462. list='$(DISTFILES)'; \
  463. dist_files=`for file in $$list; do echo $$file; done | \
  464. sed -e "s|^$$srcdirstrip/||;t" \
  465. -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
  466. case $$dist_files in \
  467. */*) $(MKDIR_P) `echo "$$dist_files" | \
  468. sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
  469. sort -u` ;; \
  470. esac; \
  471. for file in $$dist_files; do \
  472. if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
  473. if test -d $$d/$$file; then \
  474. dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
  475. if test -d "$(distdir)/$$file"; then \
  476. find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  477. fi; \
  478. if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
  479. cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
  480. find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  481. fi; \
  482. cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
  483. else \
  484. test -f "$(distdir)/$$file" \
  485. || cp -p $$d/$$file "$(distdir)/$$file" \
  486. || exit 1; \
  487. fi; \
  488. done
  489. @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
  490. if test "$$subdir" = .; then :; else \
  491. test -d "$(distdir)/$$subdir" \
  492. || $(MKDIR_P) "$(distdir)/$$subdir" \
  493. || exit 1; \
  494. fi; \
  495. done
  496. @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
  497. if test "$$subdir" = .; then :; else \
  498. dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
  499. $(am__relativize); \
  500. new_distdir=$$reldir; \
  501. dir1=$$subdir; dir2="$(top_distdir)"; \
  502. $(am__relativize); \
  503. new_top_distdir=$$reldir; \
  504. echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
  505. echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
  506. ($(am__cd) $$subdir && \
  507. $(MAKE) $(AM_MAKEFLAGS) \
  508. top_distdir="$$new_top_distdir" \
  509. distdir="$$new_distdir" \
  510. am__remove_distdir=: \
  511. am__skip_length_check=: \
  512. am__skip_mode_fix=: \
  513. distdir) \
  514. || exit 1; \
  515. fi; \
  516. done
  517. -test -n "$(am__skip_mode_fix)" \
  518. || find "$(distdir)" -type d ! -perm -755 \
  519. -exec chmod u+rwx,go+rx {} \; -o \
  520. ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  521. ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  522. ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
  523. || chmod -R a+r "$(distdir)"
  524. dist-gzip: distdir
  525. tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
  526. $(am__remove_distdir)
  527. dist-bzip2: distdir
  528. tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
  529. $(am__remove_distdir)
  530. dist-lzip: distdir
  531. tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
  532. $(am__remove_distdir)
  533. dist-lzma: distdir
  534. tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
  535. $(am__remove_distdir)
  536. dist-xz: distdir
  537. tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
  538. $(am__remove_distdir)
  539. dist-tarZ: distdir
  540. tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
  541. $(am__remove_distdir)
  542. dist-shar: distdir
  543. shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
  544. $(am__remove_distdir)
  545. dist-zip: distdir
  546. -rm -f $(distdir).zip
  547. zip -rq $(distdir).zip $(distdir)
  548. $(am__remove_distdir)
  549. dist dist-all: distdir
  550. tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
  551. $(am__remove_distdir)
  552. # This target untars the dist file and tries a VPATH configuration. Then
  553. # it guarantees that the distribution is self-contained by making another
  554. # tarfile.
  555. distcheck: dist
  556. case '$(DIST_ARCHIVES)' in \
  557. *.tar.gz*) \
  558. GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
  559. *.tar.bz2*) \
  560. bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
  561. *.tar.lzma*) \
  562. lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
  563. *.tar.lz*) \
  564. lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
  565. *.tar.xz*) \
  566. xz -dc $(distdir).tar.xz | $(am__untar) ;;\
  567. *.tar.Z*) \
  568. uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
  569. *.shar.gz*) \
  570. GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
  571. *.zip*) \
  572. unzip $(distdir).zip ;;\
  573. esac
  574. chmod -R a-w $(distdir); chmod a+w $(distdir)
  575. mkdir $(distdir)/_build
  576. mkdir $(distdir)/_inst
  577. chmod a-w $(distdir)
  578. test -d $(distdir)/_build || exit 0; \
  579. dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  580. && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
  581. && am__cwd=`pwd` \
  582. && $(am__cd) $(distdir)/_build \
  583. && ../configure --srcdir=.. --prefix="$$dc_install_base" \
  584. $(AM_DISTCHECK_CONFIGURE_FLAGS) \
  585. $(DISTCHECK_CONFIGURE_FLAGS) \
  586. && $(MAKE) $(AM_MAKEFLAGS) \
  587. && $(MAKE) $(AM_MAKEFLAGS) dvi \
  588. && $(MAKE) $(AM_MAKEFLAGS) check \
  589. && $(MAKE) $(AM_MAKEFLAGS) install \
  590. && $(MAKE) $(AM_MAKEFLAGS) installcheck \
  591. && $(MAKE) $(AM_MAKEFLAGS) uninstall \
  592. && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
  593. distuninstallcheck \
  594. && chmod -R a-w "$$dc_install_base" \
  595. && ({ \
  596. (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
  597. && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
  598. && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
  599. && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
  600. distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
  601. } || { rm -rf "$$dc_destdir"; exit 1; }) \
  602. && rm -rf "$$dc_destdir" \
  603. && $(MAKE) $(AM_MAKEFLAGS) dist \
  604. && rm -rf $(DIST_ARCHIVES) \
  605. && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
  606. && cd "$$am__cwd" \
  607. || exit 1
  608. $(am__remove_distdir)
  609. @(echo "$(distdir) archives ready for distribution: "; \
  610. list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
  611. sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
  612. distuninstallcheck:
  613. @test -n '$(distuninstallcheck_dir)' || { \
  614. echo 'ERROR: trying to run $@ with an empty' \
  615. '$$(distuninstallcheck_dir)' >&2; \
  616. exit 1; \
  617. }; \
  618. $(am__cd) '$(distuninstallcheck_dir)' || { \
  619. echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
  620. exit 1; \
  621. }; \
  622. test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
  623. || { echo "ERROR: files left after uninstall:" ; \
  624. if test -n "$(DESTDIR)"; then \
  625. echo " (check DESTDIR support)"; \
  626. fi ; \
  627. $(distuninstallcheck_listfiles) ; \
  628. exit 1; } >&2
  629. distcleancheck: distclean
  630. @if test '$(srcdir)' = . ; then \
  631. echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  632. exit 1 ; \
  633. fi
  634. @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
  635. || { echo "ERROR: files left in build directory after distclean:" ; \
  636. $(distcleancheck_listfiles) ; \
  637. exit 1; } >&2
  638. check-am: all-am
  639. check: check-recursive
  640. all-am: Makefile $(DATA) config.h
  641. installdirs: installdirs-recursive
  642. installdirs-am:
  643. for dir in "$(DESTDIR)$(docdir)"; do \
  644. test -z "$$dir" || $(MKDIR_P) "$$dir"; \
  645. done
  646. install: install-recursive
  647. install-exec: install-exec-recursive
  648. install-data: install-data-recursive
  649. uninstall: uninstall-recursive
  650. install-am: all-am
  651. @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
  652. installcheck: installcheck-recursive
  653. install-strip:
  654. if test -z '$(STRIP)'; then \
  655. $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  656. install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  657. install; \
  658. else \
  659. $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  660. install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  661. "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
  662. fi
  663. mostlyclean-generic:
  664. clean-generic:
  665. distclean-generic:
  666. -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
  667. -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
  668. maintainer-clean-generic:
  669. @echo "This command is intended for maintainers to use"
  670. @echo "it deletes files that may require special tools to rebuild."
  671. clean: clean-recursive
  672. clean-am: clean-generic clean-libtool mostlyclean-am
  673. distclean: distclean-recursive
  674. -rm -f $(am__CONFIG_DISTCLEAN_FILES)
  675. -rm -f Makefile
  676. distclean-am: clean-am distclean-generic distclean-hdr \
  677. distclean-libtool distclean-tags
  678. dvi: dvi-recursive
  679. dvi-am:
  680. html: html-recursive
  681. html-am:
  682. info: info-recursive
  683. info-am:
  684. install-data-am: install-dist_docDATA
  685. install-dvi: install-dvi-recursive
  686. install-dvi-am:
  687. install-exec-am:
  688. install-html: install-html-recursive
  689. install-html-am:
  690. install-info: install-info-recursive
  691. install-info-am:
  692. install-man:
  693. install-pdf: install-pdf-recursive
  694. install-pdf-am:
  695. install-ps: install-ps-recursive
  696. install-ps-am:
  697. installcheck-am:
  698. maintainer-clean: maintainer-clean-recursive
  699. -rm -f $(am__CONFIG_DISTCLEAN_FILES)
  700. -rm -rf $(top_srcdir)/autom4te.cache
  701. -rm -f Makefile
  702. maintainer-clean-am: distclean-am maintainer-clean-generic
  703. mostlyclean: mostlyclean-recursive
  704. mostlyclean-am: mostlyclean-generic mostlyclean-libtool
  705. pdf: pdf-recursive
  706. pdf-am:
  707. ps: ps-recursive
  708. ps-am:
  709. uninstall-am: uninstall-dist_docDATA
  710. .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
  711. ctags-recursive install-am install-strip tags-recursive
  712. .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
  713. all all-am am--refresh check check-am clean clean-generic \
  714. clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
  715. dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
  716. dist-zip distcheck distclean distclean-generic distclean-hdr \
  717. distclean-libtool distclean-tags distcleancheck distdir \
  718. distuninstallcheck dvi dvi-am html html-am info info-am \
  719. install install-am install-data install-data-am \
  720. install-dist_docDATA install-dvi install-dvi-am install-exec \
  721. install-exec-am install-html install-html-am install-info \
  722. install-info-am install-man install-pdf install-pdf-am \
  723. install-ps install-ps-am install-strip installcheck \
  724. installcheck-am installdirs installdirs-am maintainer-clean \
  725. maintainer-clean-generic mostlyclean mostlyclean-generic \
  726. mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
  727. uninstall uninstall-am uninstall-dist_docDATA
  728. # Tell versions [3.59,3.63) of GNU make to not export all variables.
  729. # Otherwise a system limit (for SysV at least) may be exceeded.
  730. .NOEXPORT: