Meson WrapDB for Google's cityhash.
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

install-sh 13KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520
  1. #!/bin/sh
  2. # install - install a program, script, or datafile
  3. scriptversion=2009-04-28.21; # UTC
  4. # This originates from X11R5 (mit/util/scripts/install.sh), which was
  5. # later released in X11R6 (xc/config/util/install.sh) with the
  6. # following copyright and license.
  7. #
  8. # Copyright (C) 1994 X Consortium
  9. #
  10. # Permission is hereby granted, free of charge, to any person obtaining a copy
  11. # of this software and associated documentation files (the "Software"), to
  12. # deal in the Software without restriction, including without limitation the
  13. # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
  14. # sell copies of the Software, and to permit persons to whom the Software is
  15. # furnished to do so, subject to the following conditions:
  16. #
  17. # The above copyright notice and this permission notice shall be included in
  18. # all copies or substantial portions of the Software.
  19. #
  20. # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  21. # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  22. # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
  23. # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
  24. # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
  25. # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  26. #
  27. # Except as contained in this notice, the name of the X Consortium shall not
  28. # be used in advertising or otherwise to promote the sale, use or other deal-
  29. # ings in this Software without prior written authorization from the X Consor-
  30. # tium.
  31. #
  32. #
  33. # FSF changes to this file are in the public domain.
  34. #
  35. # Calling this script install-sh is preferred over install.sh, to prevent
  36. # `make' implicit rules from creating a file called install from it
  37. # when there is no Makefile.
  38. #
  39. # This script is compatible with the BSD install script, but was written
  40. # from scratch.
  41. nl='
  42. '
  43. IFS=" "" $nl"
  44. # set DOITPROG to echo to test this script
  45. # Don't use :- since 4.3BSD and earlier shells don't like it.
  46. doit=${DOITPROG-}
  47. if test -z "$doit"; then
  48. doit_exec=exec
  49. else
  50. doit_exec=$doit
  51. fi
  52. # Put in absolute file names if you don't have them in your path;
  53. # or use environment vars.
  54. chgrpprog=${CHGRPPROG-chgrp}
  55. chmodprog=${CHMODPROG-chmod}
  56. chownprog=${CHOWNPROG-chown}
  57. cmpprog=${CMPPROG-cmp}
  58. cpprog=${CPPROG-cp}
  59. mkdirprog=${MKDIRPROG-mkdir}
  60. mvprog=${MVPROG-mv}
  61. rmprog=${RMPROG-rm}
  62. stripprog=${STRIPPROG-strip}
  63. posix_glob='?'
  64. initialize_posix_glob='
  65. test "$posix_glob" != "?" || {
  66. if (set -f) 2>/dev/null; then
  67. posix_glob=
  68. else
  69. posix_glob=:
  70. fi
  71. }
  72. '
  73. posix_mkdir=
  74. # Desired mode of installed file.
  75. mode=0755
  76. chgrpcmd=
  77. chmodcmd=$chmodprog
  78. chowncmd=
  79. mvcmd=$mvprog
  80. rmcmd="$rmprog -f"
  81. stripcmd=
  82. src=
  83. dst=
  84. dir_arg=
  85. dst_arg=
  86. copy_on_change=false
  87. no_target_directory=
  88. usage="\
  89. Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
  90. or: $0 [OPTION]... SRCFILES... DIRECTORY
  91. or: $0 [OPTION]... -t DIRECTORY SRCFILES...
  92. or: $0 [OPTION]... -d DIRECTORIES...
  93. In the 1st form, copy SRCFILE to DSTFILE.
  94. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
  95. In the 4th, create DIRECTORIES.
  96. Options:
  97. --help display this help and exit.
  98. --version display version info and exit.
  99. -c (ignored)
  100. -C install only if different (preserve the last data modification time)
  101. -d create directories instead of installing files.
  102. -g GROUP $chgrpprog installed files to GROUP.
  103. -m MODE $chmodprog installed files to MODE.
  104. -o USER $chownprog installed files to USER.
  105. -s $stripprog installed files.
  106. -t DIRECTORY install into DIRECTORY.
  107. -T report an error if DSTFILE is a directory.
  108. Environment variables override the default commands:
  109. CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
  110. RMPROG STRIPPROG
  111. "
  112. while test $# -ne 0; do
  113. case $1 in
  114. -c) ;;
  115. -C) copy_on_change=true;;
  116. -d) dir_arg=true;;
  117. -g) chgrpcmd="$chgrpprog $2"
  118. shift;;
  119. --help) echo "$usage"; exit $?;;
  120. -m) mode=$2
  121. case $mode in
  122. *' '* | *' '* | *'
  123. '* | *'*'* | *'?'* | *'['*)
  124. echo "$0: invalid mode: $mode" >&2
  125. exit 1;;
  126. esac
  127. shift;;
  128. -o) chowncmd="$chownprog $2"
  129. shift;;
  130. -s) stripcmd=$stripprog;;
  131. -t) dst_arg=$2
  132. shift;;
  133. -T) no_target_directory=true;;
  134. --version) echo "$0 $scriptversion"; exit $?;;
  135. --) shift
  136. break;;
  137. -*) echo "$0: invalid option: $1" >&2
  138. exit 1;;
  139. *) break;;
  140. esac
  141. shift
  142. done
  143. if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
  144. # When -d is used, all remaining arguments are directories to create.
  145. # When -t is used, the destination is already specified.
  146. # Otherwise, the last argument is the destination. Remove it from $@.
  147. for arg
  148. do
  149. if test -n "$dst_arg"; then
  150. # $@ is not empty: it contains at least $arg.
  151. set fnord "$@" "$dst_arg"
  152. shift # fnord
  153. fi
  154. shift # arg
  155. dst_arg=$arg
  156. done
  157. fi
  158. if test $# -eq 0; then
  159. if test -z "$dir_arg"; then
  160. echo "$0: no input file specified." >&2
  161. exit 1
  162. fi
  163. # It's OK to call `install-sh -d' without argument.
  164. # This can happen when creating conditional directories.
  165. exit 0
  166. fi
  167. if test -z "$dir_arg"; then
  168. trap '(exit $?); exit' 1 2 13 15
  169. # Set umask so as not to create temps with too-generous modes.
  170. # However, 'strip' requires both read and write access to temps.
  171. case $mode in
  172. # Optimize common cases.
  173. *644) cp_umask=133;;
  174. *755) cp_umask=22;;
  175. *[0-7])
  176. if test -z "$stripcmd"; then
  177. u_plus_rw=
  178. else
  179. u_plus_rw='% 200'
  180. fi
  181. cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
  182. *)
  183. if test -z "$stripcmd"; then
  184. u_plus_rw=
  185. else
  186. u_plus_rw=,u+rw
  187. fi
  188. cp_umask=$mode$u_plus_rw;;
  189. esac
  190. fi
  191. for src
  192. do
  193. # Protect names starting with `-'.
  194. case $src in
  195. -*) src=./$src;;
  196. esac
  197. if test -n "$dir_arg"; then
  198. dst=$src
  199. dstdir=$dst
  200. test -d "$dstdir"
  201. dstdir_status=$?
  202. else
  203. # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
  204. # might cause directories to be created, which would be especially bad
  205. # if $src (and thus $dsttmp) contains '*'.
  206. if test ! -f "$src" && test ! -d "$src"; then
  207. echo "$0: $src does not exist." >&2
  208. exit 1
  209. fi
  210. if test -z "$dst_arg"; then
  211. echo "$0: no destination specified." >&2
  212. exit 1
  213. fi
  214. dst=$dst_arg
  215. # Protect names starting with `-'.
  216. case $dst in
  217. -*) dst=./$dst;;
  218. esac
  219. # If destination is a directory, append the input filename; won't work
  220. # if double slashes aren't ignored.
  221. if test -d "$dst"; then
  222. if test -n "$no_target_directory"; then
  223. echo "$0: $dst_arg: Is a directory" >&2
  224. exit 1
  225. fi
  226. dstdir=$dst
  227. dst=$dstdir/`basename "$src"`
  228. dstdir_status=0
  229. else
  230. # Prefer dirname, but fall back on a substitute if dirname fails.
  231. dstdir=`
  232. (dirname "$dst") 2>/dev/null ||
  233. expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
  234. X"$dst" : 'X\(//\)[^/]' \| \
  235. X"$dst" : 'X\(//\)$' \| \
  236. X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
  237. echo X"$dst" |
  238. sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
  239. s//\1/
  240. q
  241. }
  242. /^X\(\/\/\)[^/].*/{
  243. s//\1/
  244. q
  245. }
  246. /^X\(\/\/\)$/{
  247. s//\1/
  248. q
  249. }
  250. /^X\(\/\).*/{
  251. s//\1/
  252. q
  253. }
  254. s/.*/./; q'
  255. `
  256. test -d "$dstdir"
  257. dstdir_status=$?
  258. fi
  259. fi
  260. obsolete_mkdir_used=false
  261. if test $dstdir_status != 0; then
  262. case $posix_mkdir in
  263. '')
  264. # Create intermediate dirs using mode 755 as modified by the umask.
  265. # This is like FreeBSD 'install' as of 1997-10-28.
  266. umask=`umask`
  267. case $stripcmd.$umask in
  268. # Optimize common cases.
  269. *[2367][2367]) mkdir_umask=$umask;;
  270. .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
  271. *[0-7])
  272. mkdir_umask=`expr $umask + 22 \
  273. - $umask % 100 % 40 + $umask % 20 \
  274. - $umask % 10 % 4 + $umask % 2
  275. `;;
  276. *) mkdir_umask=$umask,go-w;;
  277. esac
  278. # With -d, create the new directory with the user-specified mode.
  279. # Otherwise, rely on $mkdir_umask.
  280. if test -n "$dir_arg"; then
  281. mkdir_mode=-m$mode
  282. else
  283. mkdir_mode=
  284. fi
  285. posix_mkdir=false
  286. case $umask in
  287. *[123567][0-7][0-7])
  288. # POSIX mkdir -p sets u+wx bits regardless of umask, which
  289. # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
  290. ;;
  291. *)
  292. tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
  293. trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
  294. if (umask $mkdir_umask &&
  295. exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
  296. then
  297. if test -z "$dir_arg" || {
  298. # Check for POSIX incompatibilities with -m.
  299. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
  300. # other-writeable bit of parent directory when it shouldn't.
  301. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
  302. ls_ld_tmpdir=`ls -ld "$tmpdir"`
  303. case $ls_ld_tmpdir in
  304. d????-?r-*) different_mode=700;;
  305. d????-?--*) different_mode=755;;
  306. *) false;;
  307. esac &&
  308. $mkdirprog -m$different_mode -p -- "$tmpdir" && {
  309. ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
  310. test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
  311. }
  312. }
  313. then posix_mkdir=:
  314. fi
  315. rmdir "$tmpdir/d" "$tmpdir"
  316. else
  317. # Remove any dirs left behind by ancient mkdir implementations.
  318. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
  319. fi
  320. trap '' 0;;
  321. esac;;
  322. esac
  323. if
  324. $posix_mkdir && (
  325. umask $mkdir_umask &&
  326. $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
  327. )
  328. then :
  329. else
  330. # The umask is ridiculous, or mkdir does not conform to POSIX,
  331. # or it failed possibly due to a race condition. Create the
  332. # directory the slow way, step by step, checking for races as we go.
  333. case $dstdir in
  334. /*) prefix='/';;
  335. -*) prefix='./';;
  336. *) prefix='';;
  337. esac
  338. eval "$initialize_posix_glob"
  339. oIFS=$IFS
  340. IFS=/
  341. $posix_glob set -f
  342. set fnord $dstdir
  343. shift
  344. $posix_glob set +f
  345. IFS=$oIFS
  346. prefixes=
  347. for d
  348. do
  349. test -z "$d" && continue
  350. prefix=$prefix$d
  351. if test -d "$prefix"; then
  352. prefixes=
  353. else
  354. if $posix_mkdir; then
  355. (umask=$mkdir_umask &&
  356. $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
  357. # Don't fail if two instances are running concurrently.
  358. test -d "$prefix" || exit 1
  359. else
  360. case $prefix in
  361. *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
  362. *) qprefix=$prefix;;
  363. esac
  364. prefixes="$prefixes '$qprefix'"
  365. fi
  366. fi
  367. prefix=$prefix/
  368. done
  369. if test -n "$prefixes"; then
  370. # Don't fail if two instances are running concurrently.
  371. (umask $mkdir_umask &&
  372. eval "\$doit_exec \$mkdirprog $prefixes") ||
  373. test -d "$dstdir" || exit 1
  374. obsolete_mkdir_used=true
  375. fi
  376. fi
  377. fi
  378. if test -n "$dir_arg"; then
  379. { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
  380. { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
  381. { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
  382. test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
  383. else
  384. # Make a couple of temp file names in the proper directory.
  385. dsttmp=$dstdir/_inst.$$_
  386. rmtmp=$dstdir/_rm.$$_
  387. # Trap to clean up those temp files at exit.
  388. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
  389. # Copy the file name to the temp name.
  390. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
  391. # and set any options; do chmod last to preserve setuid bits.
  392. #
  393. # If any of these fail, we abort the whole thing. If we want to
  394. # ignore errors from any of these, just make sure not to ignore
  395. # errors from the above "$doit $cpprog $src $dsttmp" command.
  396. #
  397. { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
  398. { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
  399. { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
  400. { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
  401. # If -C, don't bother to copy if it wouldn't change the file.
  402. if $copy_on_change &&
  403. old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
  404. new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
  405. eval "$initialize_posix_glob" &&
  406. $posix_glob set -f &&
  407. set X $old && old=:$2:$4:$5:$6 &&
  408. set X $new && new=:$2:$4:$5:$6 &&
  409. $posix_glob set +f &&
  410. test "$old" = "$new" &&
  411. $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
  412. then
  413. rm -f "$dsttmp"
  414. else
  415. # Rename the file to the real destination.
  416. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
  417. # The rename failed, perhaps because mv can't rename something else
  418. # to itself, or perhaps because mv is so ancient that it does not
  419. # support -f.
  420. {
  421. # Now remove or move aside any old file at destination location.
  422. # We try this two ways since rm can't unlink itself on some
  423. # systems and the destination file might be busy for other
  424. # reasons. In this case, the final cleanup might fail but the new
  425. # file should still install successfully.
  426. {
  427. test ! -f "$dst" ||
  428. $doit $rmcmd -f "$dst" 2>/dev/null ||
  429. { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
  430. { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
  431. } ||
  432. { echo "$0: cannot unlink or rename $dst" >&2
  433. (exit 1); exit 1
  434. }
  435. } &&
  436. # Now rename the file to the real destination.
  437. $doit $mvcmd "$dsttmp" "$dst"
  438. }
  439. fi || exit 1
  440. trap '' 0
  441. fi
  442. done
  443. # Local variables:
  444. # eval: (add-hook 'write-file-hooks 'time-stamp)
  445. # time-stamp-start: "scriptversion="
  446. # time-stamp-format: "%:y-%02m-%02d.%02H"
  447. # time-stamp-time-zone: "UTC"
  448. # time-stamp-end: "; # UTC"
  449. # End: